Replicating from Amazon Aurora, operates by directly accessing the binary log provided by Aurora and enables you to take advantage of the Amazon Web, either replicating from the remote Aurora instance, or to a standard EC2 instance within AWS. The complexity with Aurora is that there is no access to the host that is running the instance, or the MySQL binary logs.
To use this service, two aspects of the Tungsten Replicator are
required, direct mode and unprivileged user support. Direct mode reads the
MySQL binary log over the network, rather than accessing the binlog on the
filesystem. The unprivileged mode enables the user to access and update
information within Aurora without requiring
SUPER privileges, which are
unavailable within an Aurora instance. For more information, see
Section B.4.6, “MySQL Unprivileged Users”.
The deployment requires a host for the extractor installation, this can be an EC2 instance within your AWS environment, or it could be a remote host in your own environment.
This deployment follows a similar model to an Offboard Installation
Before starting the installation, the prerequisites must have been completed (see Appendix B, Prerequisites) on both the Host designated for the installation of the extractor, and within the source database instance.
There are two types of installation, either via a Staging Install, or via an ini file install.
To understand the differences between these two installation methods, see
Section 9.1, “Comparing Staging and INI
tpm Methods”
Regardless of which installation method you choose, the steps are the same, and are outlined below.
Install the Tungsten Replicator package (see Section 2.1.2, “Using the RPM package files”), or download the compressed tarball and unpack it, either on the source host, or on the staging host:
shell>
cd /opt/continuent/softwareshell>tar zxf tungsten-replicator-6.1.25-6.tar.gzChange to the Tungsten Replicator staging directory:
shell>
cd tungsten-replicator-6.1.25-6Configure the replicator for extraction (In this example, the service name is alpha)
Click the link below to switch examples between Staging and INI methods
shell>
./tools/tpm configure defaults \ --reset \ --install-directory=/opt/continuent \ --user=tungsten \ --profile-script=~/.bash_profile \ --mysql-allow-intensive-checks=true \ --skip-validation-check=InstallerMasterSlaveCheck \ --skip-validation-check=MySQLPermissionsCheck \ --skip-validation-check=MySQLBinaryLogsEnabledCheck \ --skip-validation-check=MySQLMyISAMCheck \ --skip-validation-check=RowBasedBinaryLoggingCheck \ --rest-api-admin-user=apiuser \ --rest-api-admin-pass=secretshell>./tools/tpm configure alpha \ --master=localhost \ --members=localhost \ --enable-heterogeneous-service=true \ --privileged-master=false \ --replication-host=rds.endpoint.url \ --replication-port=3306 \ --replication-user=tungsten_alpha \ --replication-password=secret \ --datasource-mysql-conf=/dev/null \ --svc-extractor-filters=dropcatalogdata \ --property=replicator.service.comments=trueshell>
vi /etc/tungsten/tungsten.ini[defaults] install-directory=/opt/continuent user=tungsten profile-script=~/.bash_profile mysql-allow-intensive-checks=true skip-validation-check=InstallerMasterSlaveCheck skip-validation-check=MySQLPermissionsCheck skip-validation-check=MySQLBinaryLogsEnabledCheck skip-validation-check=MySQLMyISAMCheck skip-validation-check=RowBasedBinaryLoggingCheck rest-api-admin-user=apiuser rest-api-admin-pass=secret[alpha] master=localhost members=localhost enable-heterogeneous-service=true privileged-master=false replication-host=rds.endpoint.url replication-port=3306 replication-user=tungsten_alpha replication-password=secret datasource-mysql-conf=/dev/null svc-extractor-filters=dropcatalogdata property=replicator.service.comments=trueConfiguration group
defaultsThe description of each of the options is shown below; click the icon to hide this detail:
For staging configurations, deletes all pre-existing configuration information between updating with the new configuration values.
--install-directory=/opt/continuentinstall-directory=/opt/continuentPath to the directory where the active deployment will be installed. The configured directory will contain the software, THL and relay log information unless configured otherwise.
System User
--profile-script=~/.bash_profileprofile-script=~/.bash_profileAppend commands to include env.sh in this profile script
--mysql-allow-intensive-checks=truemysql-allow-intensive-checks=trueFor MySQL installation, enables detailed checks on the supported data types within the MySQL database to confirm compatibility. This includes checking each table definition individually for any unsupported data types.
--skip-validation-check=InstallerMasterSlaveCheckskip-validation-check=InstallerMasterSlaveCheckThe
--skip-validation-checkdisables a given validation check. If any validation check fails, the installation, validation or configuration will automatically stop.Warning
Using this option enables you to bypass the specified check, although skipping a check may lead to an invalid or non-working configuration.
You can identify a given check if an error or warning has been raised during configuration. For example, the default table type check:
... ERROR >> centos >> The datasource root@centos:3306 (WITH PASSWORD) » uses MyISAM as the default storage engine (MySQLDefaultTableTypeCheck) ...
The check in this case is
MySQLDefaultTableTypeCheck, and could be ignored using--skip-validation-check=MySQLDefaultTableTypeCheck.Setting both
--skip-validation-checkand--enable-validation-checkis equivalent to explicitly disabling the specified check.--skip-validation-check=MySQLPermissionsCheckskip-validation-check=MySQLPermissionsCheckThe
--skip-validation-checkdisables a given validation check. If any validation check fails, the installation, validation or configuration will automatically stop.Warning
Using this option enables you to bypass the specified check, although skipping a check may lead to an invalid or non-working configuration.
You can identify a given check if an error or warning has been raised during configuration. For example, the default table type check:
... ERROR >> centos >> The datasource root@centos:3306 (WITH PASSWORD) » uses MyISAM as the default storage engine (MySQLDefaultTableTypeCheck) ...
The check in this case is
MySQLDefaultTableTypeCheck, and could be ignored using--skip-validation-check=MySQLDefaultTableTypeCheck.Setting both
--skip-validation-checkand--enable-validation-checkis equivalent to explicitly disabling the specified check.--skip-validation-check=MySQLBinaryLogsEnabledCheckskip-validation-check=MySQLBinaryLogsEnabledCheckThe
--skip-validation-checkdisables a given validation check. If any validation check fails, the installation, validation or configuration will automatically stop.Warning
Using this option enables you to bypass the specified check, although skipping a check may lead to an invalid or non-working configuration.
You can identify a given check if an error or warning has been raised during configuration. For example, the default table type check:
... ERROR >> centos >> The datasource root@centos:3306 (WITH PASSWORD) » uses MyISAM as the default storage engine (MySQLDefaultTableTypeCheck) ...
The check in this case is
MySQLDefaultTableTypeCheck, and could be ignored using--skip-validation-check=MySQLDefaultTableTypeCheck.Setting both
--skip-validation-checkand--enable-validation-checkis equivalent to explicitly disabling the specified check.--skip-validation-check=MySQLMyISAMCheckskip-validation-check=MySQLMyISAMCheckThe
--skip-validation-checkdisables a given validation check. If any validation check fails, the installation, validation or configuration will automatically stop.Warning
Using this option enables you to bypass the specified check, although skipping a check may lead to an invalid or non-working configuration.
You can identify a given check if an error or warning has been raised during configuration. For example, the default table type check:
... ERROR >> centos >> The datasource root@centos:3306 (WITH PASSWORD) » uses MyISAM as the default storage engine (MySQLDefaultTableTypeCheck) ...
The check in this case is
MySQLDefaultTableTypeCheck, and could be ignored using--skip-validation-check=MySQLDefaultTableTypeCheck.Setting both
--skip-validation-checkand--enable-validation-checkis equivalent to explicitly disabling the specified check.--skip-validation-check=RowBasedBinaryLoggingCheckskip-validation-check=RowBasedBinaryLoggingCheckThe
--skip-validation-checkdisables a given validation check. If any validation check fails, the installation, validation or configuration will automatically stop.Warning
Using this option enables you to bypass the specified check, although skipping a check may lead to an invalid or non-working configuration.
You can identify a given check if an error or warning has been raised during configuration. For example, the default table type check:
... ERROR >> centos >> The datasource root@centos:3306 (WITH PASSWORD) » uses MyISAM as the default storage engine (MySQLDefaultTableTypeCheck) ...
The check in this case is
MySQLDefaultTableTypeCheck, and could be ignored using--skip-validation-check=MySQLDefaultTableTypeCheck.Setting both
--skip-validation-checkand--enable-validation-checkis equivalent to explicitly disabling the specified check.--rest-api-admin-user=apiuser
Optional: Must be specified along with rest-api-admin-pass if you wish to access the full API features and use the Dashboard GUI for cluster installations.rest-api-admin-user=apiuser--rest-api-admin-pass=secret
Optional: Must be specified along with rest-api-admin-user if you wish to access the full API features.rest-api-admin-pass=secret
Configuration group
alphaThe description of each of the options is shown below; click the icon to hide this detail:
The hostname of the primary (extractor) within the current service.
Hostnames for the dataservice members
--enable-heterogeneous-service=trueenable-heterogeneous-service=trueOn a Primary
--mysql-use-bytes-for-stringis set to false.colnamesfilter is enabled (in thebinlog-to-qstage to add column names to the THL information.pkeyfilter is enabled (in thebinlog-to-qandq-to-dbmsstage), with theaddPkeyToInsertsandaddColumnsToDeletesfilter options set to false.enumtostringfilter is enabled (in theq-to-thlstage), to translateENUMvalues to their string equivalents.settostringfilter is enabled (in theq-to-thlstage), to translateSETvalues to their string equivalents.
On a Replica
--mysql-use-bytes-for-stringis set to true.
Does the login for the Primary database service have superuser privileges
--replication-host=rds.endpoint.urlreplication-host=rds.endpoint.urlHostname of the datasource where the database is located. If the specified hostname matches the current host or member name, the database is assumed to be local. If the hostnames do not match, extraction is assumed to be via remote access. For MySQL hosts, this configures a remote replication Replica (relay) connection.
The network port used to connect to the database server. The default port used depends on the database being configured.
--replication-user=tungsten_alphareplication-user=tungsten_alphaFor databases that required authentication, the username to use when connecting to the database using the corresponding connection method (native, JDBC, etc.).
The password to be used when connecting to the database using the corresponding
--replication-user.--datasource-mysql-conf=/dev/nulldatasource-mysql-conf=/dev/nullMySQL config file
--svc-extractor-filters=dropcatalogdatasvc-extractor-filters=dropcatalogdataReplication service extractor filters
--property=replicator.service.comments=trueproperty=replicator.service.comments=trueThe
--propertyoption enables you to explicitly set property values in the target files. A number of different models are supported:key=valueSet the property defined by
keyto the specified value without evaluating any template values or other rules.key+=valueAdd the value to the property defined by
key. Template values and other options append their settings to the end of the specified property.key~=/match/replace/Evaluate any template values and other settings, and then perform the specified Ruby regex operation to the property defined by
key. For example--property=replicator.key~=/(.*)/somevalue,\1/will prependsomevaluebefore the template value forreplicator.key.
Once the prerequisites and configuring of the installation has been completed, the software can be installed:
shell>
./tools/tpm install
In the above examples,
enable-heterogenous-service, is only required if the target applier is NOT a MySQL databasedatasource-mysql-conf, needs to be set as shown as we do not have access to themy.cnffile
If the installation process fails, check the output of the
/tmp/tungsten-configure.log file for
more information about the root cause.
Once the installation has been completed, you can now proceed to configure the Applier service following the relevant step within Chapter 4, Deploying Appliers.
Following installation of the applier, the services can be started. For information on starting and stopping Tungsten Cluster see Section 2.4, “Starting and Stopping Tungsten Replicator”; configuring init scripts to startup and shutdown when the system boots and shuts down, see Section 2.5, “Configuring Startup on Boot”.
Monitoring the extractor is the same as an extractor from MySQL, for information, see Section 3.2.1, “Monitoring the MySQL Extractor”.