9.8. tpm Configuration Options

tpm supports a large range of configuration options, which can be specified either:

A full list of all the available options supported is provided in Table 9.7, “tpm Configuration Options”.

Table 9.7. tpm Configuration Options

CmdLine OptionINI File OptionDescription
--auto-enable, --repl-auto-enableauto-enable, repl-auto-enableAuto-enable services after start-up
--auto-recovery-delay-interval, --repl-auto-recovery-delay-intervalauto-recovery-delay-interval, repl-auto-recovery-delay-intervalDelay (in seconds) between going OFFLINE and attempting to go ONLINE
--auto-recovery-max-attempts, --repl-auto-recovery-max-attemptsauto-recovery-max-attempts, repl-auto-recovery-max-attemptsMaximum number of attempts at automatic recovery
--auto-recovery-reset-interval, --repl-auto-recovery-reset-intervalauto-recovery-reset-interval, repl-auto-recovery-reset-intervalDelay (in seconds) before autorecovery is deemed to have succeeded
--backup-directory, --repl-backup-directorybackup-directory, repl-backup-directoryPermanent backup storage directory
--backup-dump-directory, --repl-backup-dump-directorybackup-dump-directory, repl-backup-dump-directoryBackup temporary dump directory
--backup-method, --repl-backup-methodbackup-method, repl-backup-methodDatabase backup method
--backup-online, --repl-backup-onlinebackup-online, repl-backup-onlineDoes the backup script support backing up a datasource while it is ONLINE
--backup-optionsbackup-optionsSpace separated list of options to pass directly to the underlying backup binary in use.
--backup-retention, --repl-backup-retentionbackup-retention, repl-backup-retentionNumber of backups to retain
--backup-script, --repl-backup-scriptbackup-script, repl-backup-scriptWhat is the path to the backup script
--batch-enabledbatch-enabledShould the replicator service use a batch applier
--batch-load-languagebatch-load-languageWhich script language to use for batch loading
--batch-load-templatebatch-load-templateValue for the loadBatchTemplate property
--repl-buffer-sizerepl-buffer-sizeReplicator queue size between stages (min 1)
--channels, --repl-channelschannels, repl-channelsNumber of replication channels to use for parallel apply.
--cluster-slave-auto-recovery-delay-interval, --cluster-slave-repl-auto-recovery-delay-intervalcluster-slave-auto-recovery-delay-interval, cluster-slave-repl-auto-recovery-delay-intervalDefault value for --auto-recovery-delay-interval when --topology=cluster-slave
--cluster-slave-auto-recovery-max-attempts, --cluster-slave-repl-auto-recovery-max-attemptscluster-slave-auto-recovery-max-attempts, cluster-slave-repl-auto-recovery-max-attemptsDefault value for --auto-recovery-max-attempts when --topology=cluster-slave
--cluster-slave-auto-recovery-reset-interval, --cluster-slave-repl-auto-recovery-reset-intervalcluster-slave-auto-recovery-reset-interval, cluster-slave-repl-auto-recovery-reset-intervalDefault value for --auto-recovery-reset-interval when --topology=cluster-slave
--config-fileconfig-fileDisplay help information for content of the config file
--consistency-policy, --repl-consistency-policyconsistency-policy, repl-consistency-policyShould the replicator stop or warn if a consistency check fails?
--dataservice-namedataservice-nameLimit the command to the hosts in this dataservice Multiple data services may be specified by providing a comma separated list
--dataservice-relay-enableddataservice-relay-enabledMake this dataservice a replica of another
--dataservice-schemadataservice-schemaThe db schema to hold dataservice details
--dataservice-thl-portdataservice-thl-portPort to use for THL operations
--dataservice-vip-enableddataservice-vip-enabledIs VIP management enabled?
--dataservice-vip-ipaddressdataservice-vip-ipaddressVIP IP address
--dataservice-vip-netmaskdataservice-vip-netmaskVIP netmask
--datasource-boot-script, --repl-datasource-boot-scriptdatasource-boot-script, repl-datasource-boot-scriptDatabase start script
--datasource-enable-ssl, --repl-datasource-enable-ssldatasource-enable-ssl, repl-datasource-enable-sslEnable SSL connection to DBMS server
--datasource-log-directory, --repl-datasource-log-directorydatasource-log-directory, repl-datasource-log-directoryPrimary log directory
--datasource-log-pattern, --repl-datasource-log-patterndatasource-log-pattern, repl-datasource-log-patternPrimary log filename pattern
--datasource-mysql-conf, --repl-datasource-mysql-confdatasource-mysql-conf, repl-datasource-mysql-confMySQL config file
--datasource-mysql-data-directory, --repl-datasource-mysql-data-directorydatasource-mysql-data-directory, repl-datasource-mysql-data-directoryMySQL data directory
--datasource-mysql-ibdata-directory, --repl-datasource-mysql-ibdata-directorydatasource-mysql-ibdata-directory, repl-datasource-mysql-ibdata-directoryMySQL InnoDB data directory
--datasource-mysql-iblog-directory, --repl-datasource-mysql-iblog-directorydatasource-mysql-iblog-directory, repl-datasource-mysql-iblog-directoryMySQL InnoDB log directory
--datasource-mysql-ssl-ca, --repl-datasource-mysql-ssl-cadatasource-mysql-ssl-ca, repl-datasource-mysql-ssl-caMySQL SSL CA file
--datasource-mysql-ssl-cert, --repl-datasource-mysql-ssl-certdatasource-mysql-ssl-cert, repl-datasource-mysql-ssl-certMySQL SSL certificate file
--datasource-mysql-ssl-key, --repl-datasource-mysql-ssl-keydatasource-mysql-ssl-key, repl-datasource-mysql-ssl-keyMySQL SSL key file
--datasource-oracle-service, --repl-datasource-oracle-servicedatasource-oracle-service, repl-datasource-oracle-serviceOracle Service Name
--datasource-systemctl-service, --repl-datasource-systemctl-servicedatasource-systemctl-service, repl-datasource-systemctl-serviceDatabase systemctl script
--datasource-type, --repl-datasource-typedatasource-type, repl-datasource-typeDatabase type
--deletedeleteDelete the named data service from the configuration Data Service options
--direct-datasource-log-directory, --repl-direct-datasource-log-directorydirect-datasource-log-directory, repl-direct-datasource-log-directoryPrimary log directory
--direct-datasource-log-pattern, --repl-direct-datasource-log-patterndirect-datasource-log-pattern, repl-direct-datasource-log-patternPrimary log filename pattern
--direct-datasource-type, --repl-direct-datasource-typedirect-datasource-type, repl-direct-datasource-typeDatabase type
--direct-replication-host, --direct-datasource-host, --repl-direct-datasource-hostdirect-datasource-host, direct-replication-host, repl-direct-datasource-hostDatabase server hostname
--direct-replication-password, --direct-datasource-password, --repl-direct-datasource-passworddirect-datasource-password, direct-replication-password, repl-direct-datasource-passwordPassword for datasource connection
--direct-replication-port, --direct-datasource-port, --repl-direct-datasource-portdirect-datasource-port, direct-replication-port, repl-direct-datasource-portDatabase server port
--direct-replication-user, --direct-datasource-user, --repl-direct-datasource-userdirect-datasource-user, direct-replication-user, repl-direct-datasource-userDatabase login for Tungsten
--directorydirectorySet the directory of an existing installation used during fetching an existing configuration
--disable-relay-logs, --repl-disable-relay-logsdisable-relay-logs, repl-disable-relay-logsDisable the use of relay-logs?
--disable-security-controlsdisable-security-controlsDisables all forms of security, including SSL, TLS and authentication
--disable-slave-extractor, --repl-disable-slave-extractordisable-slave-extractor, repl-disable-slave-extractorShould replica servers support the primary role?
--drop-static-columns-in-updatesdrop-static-columns-in-updatesThis will modify UPDATE transactions in row-based replication and eliminate any columns that were not modified.
--enable-active-witnesses, --active-witnessesactive-witnesses, enable-active-witnessesEnable active witness hosts
--enable-batch-masterenable-batch-masterEnable batch operation for the primary
--enable-batch-serviceenable-batch-serviceEnables batch mode for a service
--enable-batch-slaveenable-batch-slaveEnable batch operation for the Replica
--enable-heterogeneous-masterenable-heterogeneous-masterEnable heterogeneous operation for the primary
--enable-heterogeneous-serviceenable-heterogeneous-serviceEnable heterogeneous operation
--enable-heterogeneous-slaveenable-heterogeneous-slaveEnable heterogeneous operation for the replica
--enable-jgroups-ssl, --jgroups-sslenable-jgroups-ssl, jgroups-sslEnable SSL encryption of JGroups communication on this host
--enable-rmi-authentication, --rmi-authenticationenable-rmi-authentication, rmi-authenticationEnable RMI authentication for the services running on this host
--enable-rmi-ssl, --rmi-sslenable-rmi-ssl, rmi-sslEnable SSL encryption of RMI communication on this host
--enable-slave-thl-listener, --repl-enable-slave-thl-listenerenable-slave-thl-listener, repl-enable-slave-thl-listenerShould this service allow THL connections?
--enable-sudo-access, --root-command-prefixenable-sudo-access, root-command-prefixRun root commands using sudo
--enable-thl-ssl, --repl-enable-thl-ssl, --thl-sslenable-thl-ssl, repl-enable-thl-ssl, thl-sslEnable SSL encryption of THL communication for this service
--executable-prefixexecutable-prefixAdds a prefix to command aliases
--file-protection-levelfile-protection-levelProtection level for Continuent files
--file-protection-umaskfile-protection-umaskProtection umask for Continuent files
--host-namehost-nameDNS hostname
--hostshostsLimit the command to the hosts listed You must use the hostname as it appears in the configuration.
--hub, --dataservice-hub-hostdataservice-hub-host, hubWhat is the hub host for this all-masters dataservice?
--hub-service, --dataservice-hub-servicedataservice-hub-service, hub-serviceThe data service to use for the hub of a star topology
--installinstallInstall service start scripts
--install-directory, --home-directoryhome-directory, install-directoryInstallation directory
--java-enable-concurrent-gc, --repl-java-enable-concurrent-gcjava-enable-concurrent-gc, repl-java-enable-concurrent-gcReplicator Java uses concurrent garbage collection
--java-external-lib-dir, --repl-java-external-lib-dirjava-external-lib-dir, repl-java-external-lib-dirDirectory for 3rd party Jar files required by replicator
--java-file-encoding, --repl-java-file-encodingjava-file-encoding, repl-java-file-encodingJava platform charset (esp. for heterogeneous replication)
--java-jgroups-keyjava-jgroups-keyThe alias to use for the JGroups TLS key in the keystore.
--java-jgroups-keystore-pathjava-jgroups-keystore-pathLocal path to the JGroups Java Keystore file.
--java-jmxremote-access-pathjava-jmxremote-access-pathLocal path to the Java JMX Remote Access file.
--java-keystore-passwordjava-keystore-passwordSet the password for unlocking the tungsten_keystore.jks file in the security directory. Specific for intra cluster communication.
--java-keystore-pathjava-keystore-pathLocal path to the Java Keystore file. Specific for intra cluster communication. NOTE: When java-keystore-path is passed to tpm, the keystore must contain both tls and mysql certs when appropriate. tpm will NOT add mysql cert nor generate tls cert when this flag is found, so both certs must be manually imported already.
--java-mem-size, --repl-java-mem-sizejava-mem-size, repl-java-mem-sizeReplicator Java heap memory size in Mb (min 128)
--java-passwordstore-pathjava-passwordstore-pathLocal path to the Java Password Store file.
--java-tls-aliasjava-tls-aliasThe alias to use for the TLS key/certificate in the keystore and truststore.
--java-tls-key-lifetimejava-tls-key-lifetimeLifetime for the Java TLS key
--java-tls-keystore-pathjava-tls-keystore-pathThe keystore holding a certificate to use for all Continuent TLS encryption.
--java-truststore-passwordjava-truststore-passwordThe password for unlocking the tungsten_truststore.jks file in the security directory
--java-truststore-pathjava-truststore-pathLocal path to the Java Truststore file.
--java-user-timezone, --repl-java-user-timezonejava-user-timezone, repl-java-user-timezoneJava VM Timezone (esp. for cross-site replication)
--loglogWrite all messages, visible and hidden, to this file. You may specify a filename, 'pid' or 'timestamp'.
--log-slave-updateslog-slave-updatesShould replicas log updates to binlog
--master, --dataservice-master-host, --masters, --relaydataservice-master-host, master, masters, relayHostname of the primary (or relay) host within this service
--master-preferred-role, --repl-master-preferred-rolemaster-preferred-role, repl-master-preferred-rolePreferred role for primary THL when connecting as a replica
--master-services, --dataservice-master-servicesdataservice-master-services, master-servicesData service names that should be used on each Primary
--master-thl-hostmaster-thl-hostPrimary THL Hostname
--master-thl-portmaster-thl-portPrimary THL Port
--members, --dataservice-hostsdataservice-hosts, membersHostnames for the dataservice members
--metadata-directory, --repl-metadata-directorymetadata-directory, repl-metadata-directoryReplicator metadata directory
--mysql-allow-intensive-checksmysql-allow-intensive-checksFor MySQL installation, enables detailed checks on the supported data types within the MySQL database to confirm compatibility.
--mysql-drivermysql-driverMySQL Driver Vendor
--mysql-enable-ansiquotes, --repl-mysql-enable-ansiquotesmysql-enable-ansiquotes, repl-mysql-enable-ansiquotesEnables ANSI_QUOTES mode for incoming events?
--mysql-enable-enumtostring, --repl-mysql-enable-enumtostringmysql-enable-enumtostring, repl-mysql-enable-enumtostringEnable a filter to convert ENUM values to strings
--mysql-enable-noonlykeywords, --repl-mysql-enable-noonlykeywordsmysql-enable-noonlykeywords, repl-mysql-enable-noonlykeywordsEnables a filter to translate DELETE FROM ONLY to DELETE FROM and UPDATE ONLY to UPDATE.
--mysql-enable-settostring, --repl-mysql-enable-settostringmysql-enable-settostring, repl-mysql-enable-settostringEnable a filter to convert SET types to strings
--mysql-ro-slave, --repl-mysql-ro-slavemysql-ro-slave, repl-mysql-ro-slaveReplicas are read-only?
--mysql-server-id, --repl-mysql-server-idmysql-server-id, repl-mysql-server-idExplicitly set the MySQL server ID
--mysql-use-bytes-for-string, --repl-mysql-use-bytes-for-stringmysql-use-bytes-for-string, repl-mysql-use-bytes-for-stringTransfer strings as their byte representation?
--mysql-xtrabackup-dir, --repl-mysql-xtrabackup-dirmysql-xtrabackup-dir, repl-mysql-xtrabackup-dirDirectory to use for storing xtrabackup full & incremental backups
--native-slave-takeover, --repl-native-slave-takeovernative-slave-takeover, repl-native-slave-takeoverTakeover native replication
--no-connectorsno-connectorsWhen issued during an update, connectors will not be restarted. Restart of the connectors will then need to be performed mannually for updates to take affect.
--no-deploymentno-deploymentSkip deployment steps that create the install directory
--no-validationno-validationSkip validation checks that run on each host
--optimize-row-eventsoptimize-row-eventsEnables or disables optimized row updates. Enabled by default.
--postgresql-dbname, --repl-postgresql-dbnamepostgresql-dbname, repl-postgresql-dbnameName of the database to replicate
--preferred-pathpreferred-pathAdditional command path
--prefetch-enabledprefetch-enabledShould the replicator service be setup as a prefetch applier
--prefetch-max-time-aheadprefetch-max-time-aheadMaximum number of seconds that the prefetch applier can get in front of the standard applier
--prefetch-min-time-aheadprefetch-min-time-aheadMinimum number of seconds that the prefetch applier must be in front of the standard applier
--prefetch-schemaprefetch-schemaSchema to watch for timing prefetch progress
--prefetch-sleep-timeprefetch-sleep-timeHow long to wait when the prefetch applier gets too far ahead
--privileged-masterprivileged-masterDoes the login for the Primary database service have superuser privileges
--privileged-slaveprivileged-slaveDoes the login for the Replica database service have superuser privileges
--profile-scriptprofile-scriptAppend commands to include env.sh in this profile script
--protect-configuration-filesprotect-configuration-filesWhen enabled, configuration files are protected to be only readable and updatable by the configured user
--redshift-dbname, --repl-redshift-dbnameredshift-dbname, repl-redshift-dbnameName of the Redshift database to replicate into
--relay-directory, --repl-relay-directoryrelay-directory, repl-relay-directoryDirectory for logs transferred from the Primary
--relay-enabledrelay-enabledShould the replicator service be setup as a relay.
--relay-source, --dataservice-relay-source, --master-dataservicedataservice-relay-source, master-dataservice, relay-sourceDataservice name to use as a relay source
--repl-allow-bidi-unsaferepl-allow-bidi-unsafeAllow unsafe SQL from remote service
--replace-tls-certificatereplace-tls-certificateReplace the TLS certificate
--replication-host, --datasource-host, --repl-datasource-hostdatasource-host, repl-datasource-host, replication-hostHostname of the datasource
--replication-password, --datasource-password, --repl-datasource-passworddatasource-password, repl-datasource-password, replication-passwordDatabase password
--replication-port, --datasource-port, --repl-datasource-portdatasource-port, repl-datasource-port, replication-portDatabase network port
--replication-user, --datasource-user, --repl-datasource-userdatasource-user, repl-datasource-user, replication-userUser for database connection
--resetresetClear the current configuration before processing any arguments
--rmi-port, --repl-rmi-portrepl-rmi-port, rmi-portReplication RMI listen port
--rmi-userrmi-userThe username for RMI authentication
--role, --repl-rolerepl-role, roleWhat is the replication role for this service?
--security-directorysecurity-directoryStorage directory for the Java security/encryption files
--service-alias, --dataservice-service-aliasdataservice-service-alias, service-aliasReplication alias of this dataservice
--service-nameservice-nameSet the service name
--service-type, --repl-service-typerepl-service-type, service-typeWhat is the replication service type?
--skip-statemapskip-statemapDo not copy the cluster-home/conf/statemap.properties from the previous install
--slaves, --dataservice-slaves, --membersdataservice-slaves, members, slavesWhat are the Replicas for this dataservice?
--startstartStart the services after configuration
--start-and-reportstart-and-reportStart the services and report out the status after configuration
--svc-allow-any-remote-service, --repl-svc-allow-any-remote-servicerepl-svc-allow-any-remote-service, svc-allow-any-remote-serviceReplicate from any service
--svc-applier-block-commit-interval, --repl-svc-applier-block-commit-intervalrepl-svc-applier-block-commit-interval, svc-applier-block-commit-intervalMinimum interval between commits
--svc-applier-block-commit-size, --repl-svc-applier-block-commit-sizerepl-svc-applier-block-commit-size, svc-applier-block-commit-sizeApplier block commit size (min 1)
--svc-applier-filters, --repl-svc-applier-filtersrepl-svc-applier-filters, svc-applier-filtersReplication service applier filters
--svc-extractor-filters, --repl-svc-extractor-filtersrepl-svc-extractor-filters, svc-extractor-filtersReplication service extractor filters
--svc-fail-on-zero-row-update, --repl-svc-fail-on-zero-row-updaterepl-svc-fail-on-zero-row-update, svc-fail-on-zero-row-updateHow should the replicator behave when a Row-Based Replication UPDATE or DELETE does not affect any rows.
--svc-parallelization-type, --repl-svc-parallelization-typerepl-svc-parallelization-type, svc-parallelization-typeMethod for implementing parallel apply
--svc-remote-filters, --repl-svc-remote-filtersrepl-svc-remote-filters, svc-remote-filtersReplication service remote download filters
--svc-reposition-on-source-id-change, --repl-svc-reposition-on-source-id-changerepl-svc-reposition-on-source-id-change, svc-reposition-on-source-id-changeThe Primary will come ONLINE from the current position if the stored source_id does not match the value in the static properties
--svc-shard-default-db, --repl-svc-shard-default-dbrepl-svc-shard-default-db, svc-shard-default-dbMode for setting the shard ID from the default db
--svc-systemd-config-replicatorsvc-systemd-config-replicatorUsed to provide custom systemd configuration that will be used in place of the default generated on.
--svc-table-engine, --repl-svc-table-enginerepl-svc-table-engine, svc-table-engineReplication service table engine
--svc-thl-filters, --repl-svc-thl-filtersrepl-svc-thl-filters, svc-thl-filtersReplication service THL filters
--target-dataservice, --slave-dataserviceslave-dataservice, target-dataserviceDataservice to use to determine the value of host configuration
--temp-directorytemp-directoryTemporary Directory
--template-filetemplate-fileDisplay the keys that may be used in configuration template files
--template-search-pathtemplate-search-pathAdds a new template search path for configuration file generation
--thl-directory, --repl-thl-directoryrepl-thl-directory, thl-directoryReplicator log directory
--thl-do-checksum, --repl-thl-do-checksumrepl-thl-do-checksum, thl-do-checksumExecute checksum operations on THL log files
--thl-interface, --repl-thl-interfacerepl-thl-interface, thl-interfaceListen interface to use for THL operations
--thl-log-connection-timeout, --repl-thl-log-connection-timeoutrepl-thl-log-connection-timeout, thl-log-connection-timeoutNumber of seconds to wait for a connection to the THL log
--thl-log-file-size, --repl-thl-log-file-sizerepl-thl-log-file-size, thl-log-file-sizeFile size in bytes for THL disk logs
--thl-log-fsync, --repl-thl-log-fsyncrepl-thl-log-fsync, thl-log-fsyncFsync THL records on commit. More reliable operation but adds latency to replication when using low-performance storage
--thl-log-retention, --repl-thl-log-retentionrepl-thl-log-retention, thl-log-retentionHow long do you want to keep THL files.
--thl-port, --repl-thl-portrepl-thl-port, thl-portPort to use for THL Operations
--thl-protocol, --repl-thl-protocolrepl-thl-protocol, thl-protocolProtocol to use for THL communication with this service
--topology, --dataservice-topologydataservice-topology, topologyReplication topology for the dataservice.
--track-schema-changestrack-schema-changesThis will enable filters that track DDL statements and write the resulting change to files on Replica hosts. The feature is intended for use in some batch deployments.
--useruserSystem User
--vertica-dbname, --repl-vertica-dbnamerepl-vertica-dbname, vertica-dbnameName of the database to replicate into
--witnesses, --dataservice-witnessesdataservice-witnesses, witnessesWitness hosts for the dataservice